A super cute set of 4 unique cacti cutters, each accompanied by its mirror image and a texture stamp.

These cutters can, of course be used independently, and do not need to have the texture stamped into it.

If you want to use the cutter and the stamp together, I suggest that you cut out the shape first and then press the stamp into the cut out.
These stamps were specifically designed to work with polymer clay, however there is no reason that it cannot be used with other types of clay, as long as said material has the same consistency and resistance as polymer clay.

That being said, I still recommend that you use a bit of baby powder (mica powders or corn-starch works too) on the surface of the clay BEFORE attempting to use the stamp. this is a preventative step, to reduce the risk of some of the clay getting stuck in the stamp.
Please be aware that some of the deign elements of the stamps are very fine and can be easily broken if you mishandle or mistreat them (in the case of breakage please contact the shop),If, at any point, clay gets stuck in the stamp, it is best to avoid inserting anything into the stamp itself, but rather soak it in alcohol (70% or higher isopropyl) for a few minutes and then using an old toothbrush to gently remove any clay or debris that might have become stuck in them.

All of the individual cacti are approximately the same size, or at least relative to each other. They are between 2 and 3 cm (around 1 inch) tall...